FAQ: What Does The Xl Mean On Tires?

Are XL tires better?

XL tyres have a higher load capacity than standard load tires. These tires can be used in a situation that requires higher load capacity tires. XL Tires are long-lasting load tires, XL best tires for heavy loads. Extra Load tires have better damage resistance.

What’s the difference between regular and XL tires?

When talking about tires, XL really means extra load. These tires can use higher air pressure to support more weight than a standard tire of the same size. An extra load tire will have a higher load index than a standard tire.

Do XL tires ride rough?

The XL tires have a stiffer sidewall and will ride a bit more ‘ rough ‘. Probably will respond quicker too as they have stiffer sidewalls.

What does XL mean in a tire size?

Reinforced or XL (Extra Load) tires are specially reinforced tires. They can carry heavier loads than tires of the same size. Reinforced tires are designated on the sidewall by the letters “RF”; extra load tires with the letters ” XL.” Reinforced and XL tires require higher inflation pressures than standard tires.

What does SL and XL mean on tires?

Check the tire sidewall to find the letter that indicates the load range. However, you may find these tires marked as Standard Load ( SL ) or Extra Load ( XL or Reinforced). Both have a 4-ply rating, but the Extra Load can support additional load at up to 42 PSI while the Standard Load is 36 PSI.

You might be interested:  Readers ask: What Size Tires Are 285?

What is XL load range?

Passenger Tires feature specific categories, with most falling in the ‘standard load ‘ range. Light Load (branded as LL on the sidewall) has a maximum load pressure of 35 psi. Standard Load (SL or no branding) also has a maximum load pressure of 35 psi. Extra Load ( XL ) has a maximum load pressure of 41 psi.

What does 92w XL mean on a tire?

Some vehicles are equipped with ” XL ” tires. It doesn’t mean that they’re extra large, but it does mean that they are extra-load tires. The load index on these tires is much higher than a standard-load tire, which is why it is important to replace an XL tire with another XL tire.

What does XL mean?

abbreviation for extra large; used esp. on clothing to show its size. (Definition of XL from the Cambridge Academic Content Dictionary © Cambridge University Press)

What does P mean on a tire?

P identifies your tire as a Passenger Tire. The P stands for PMetric. For example, this aspect ratio of 50 means that the tire’s section height is 50% of the tire’s section width. R indicates the construction used within the tires casing. R stands for radial construction.

Is a higher load rating better?

A tyre’s load index gives the maximum amount of weight that each individual tyre can carry. Usually considered in combination with a tyre’s speed index, the rule of thumb is that tyres with a higher load index number are capable of carrying a heavier load capacity than those with a lower number.

What does V mean on tires?

Speed Rating V Once the highest speed rating a tire could have, “ V ” used to represent a maximum of 149 mph (240 kph) or more. Nowadays, it means 149 mph but no higher.

Leave a Reply

Your email address will not be published. Required fields are marked *