How To Tell The Date Of Manufacture On Tires?

Where is the manufacture date on a tire?

Tires made in the United States have the DOT serial number located on the inside sidewall near the rim. The letters “DOT” are followed by eight to thirteen letters and/or numbers that identify where the tire was manufactured, tire size and the manufacturer’s code, along with the week and year the tire was manufactured.

How do you read a tire DOT code?

How to find the DOT code?

  1. The first two digits of the code represent the week of production during the year (from 1 to 52).
  2. The second two digits represent the year of manufacture.
  3. If your DOT code is a 3-digit number, it means your tire was produced before 2000.

How old should new tires be when purchased?

… though it could have new tread, it is still an old tire. Tire Rack’s recommendation that a tire should be replaced ten years from the date of manufacture or six years from the date it is placed into service applies to spare tires, as well, so if your vehicle is six years old or older, it’s probably…

You might be interested:  Question: How To Read Size Of Tires?

Does tire manufacture date matter?

Every tire has a birth date —the day it was manufactured —and an expiration date that is six years from that manufacture date. Most automobile manufacturers warn drivers to replace vehicle tires after six years. To wait any longer than that is a gamble with tire integrity and is risky for drivers.

How many years do tires last on average?

It may be tentative, but tires do have an expiration date. There is a general consensus that most tires should be inspected, if not replaced, at about six years and should be absolutely be swapped out after 10 years, regardless of how much tread they have left. How do you know how old your tires are?

How do you read a Bridgestone tire date code?

These letters are followed by a sequence of 8-13 letters and numbers that denote that tire’s manufacturing location, its specific size, and the manufacturer’s identifying code. The final four digits indicate the week of manufacture followed by the last two digits of the year of manufacture.

How do you read the date code on a trailer tire?

To find your tire’s date code, identify the code on the tire that begins with ‘DOT’. The ‘DOT’ should be followed by a series of four letters and/or numbers. You will find the 4-digit date code following this set of letters and/or numbers. It will be a 4-digit code containing all numbers.

When did they start putting date codes on tires?

Luckily, decoding a tire and determining the tire’s age is a pretty straightforward process, as a standardized 10-digit Tire Identification Number (often called a DOT number) was mandated by the United States Department of Transportation in 1971.

You might be interested:  Question: How Often Should You Rotate The Tires On Your Car?

Should I buy 2 tires or 4?

If you are looking to replace all-wheel drive tires, we recommend replacing all four at once. While it may be tempting to replace only two at a time, mixing new and worn tires can create a size difference from front to back, which can lead to damage to your vehicle.

At what age are tires unsafe?

While there’s no federally sanctioned safety guidance on when a tire is too old to be safe, many carmakers recommend replacement at six years from the date of manufacture. Old tires have been the culprit in fatal accidents.

Is it OK to buy 2 year old tires?

Old “New” Rubber The tread is good, and the manufacture stickers may still be on it. When tires reach a certain age the rubber begins to dry out and crack. That can make it unsafe for road use because it may run the risk of blowing out, falling apart, or lose traction during bad road conditions.

Are 10 year old Tyres safe?

The change in law So, if used it will mean a dangerous fail at annual test and a prohibition. If inspected at a DVSA enforcement check, tyres aged over 10 years old found on these positions will be considered dangerous and attract an ‘S’ marked immediate prohibition notice.

How often should you replace your tires?

When the tread is worn down, tires lose traction during braking and won’t grip the road well when driving in the rain, ice and snow. But even if there’s plenty of tread left, tires should be replaced if they ‘re too old, at least every six years.

Leave a Reply

Your email address will not be published. Required fields are marked *