What Do The Numbers On Tires Mean?

Can I use 60 instead of 65 tires?

Physically, yes they will fit. It is recommended to stay within 3% of the original tire size on the car though. The size you have is 3.09% smaller, so not recommended. You could go with 205/60-15 though if you can get a better deal on that size.

What does the 265 70r17 mean?

This number indicates that your tire has a width of 265 millimeters. 70. This number means that your tire has an aspect ratio of 70%. In other words, your tire’s sidewall height (from the edge of the rim to the tire’s tread) is 70% of the width. In this case, the sidewall height works out to be 185 millimeters.

What do the 3 numbers on a tire mean?

B: TIRE WIDTH The three-digit number following the letter is the tire’s width (from side to side, looking at the tire head on) in millimeters. It’s the height of the sidewall measured from wheel rim to top of the tread, expressed as a percentage of tire width. In other words, it’s sidewall height divided by tire width.

You might be interested:  Often asked: Hydroplaning Occurs When Your Tires?

What tire numbers and letters mean?

The number is the load rating, or the amount of weight that it can handle. The letter is the speed rating, or the maximum speed the tire is built for. As an example, a tire rated 90R could safely carry 1,323 pounds and travel at 106 mph. Consult a load and speed index to find out what your tire’s specific rating means.

What is the difference between a 60 and a 65 tire?

The 65% aspect ratio (as in 235/65/17), compared to 60%, adds almost 12 mm (1/2″) to the radius of the tire (0.65-0.60)*(235mm)=11.75mm.

Are 60 or 70 tires wider?

Generally speaking, a 215-60 series tire is wider and has a shorter sidewall then a 215-70 series tire would be and a 215-75 series tire would be taller and narrower then either the 70 series or the 60 series.

Can I use 235 tires instead of 225?

Yesthat size will work 100% perfectly, as it is the exact same diameter as the 225/75-16. 235/70-16 is actually a shorter tire.

What’s the difference between 265 and 285 tires?

The larger 285/70R17 tire in the photo above stands over an inch taller and is nearly an inch wider than the 265/70R17 size. The width of the tread is also a half-inch wider. Many late-model domestic trucks accept this difference in size.

Are wider tires better?

From a safety point of view, both types have their good sides: On a dry road, wider tires will offer more grip than narrow ones, but the risk of aquaplaning will be higher with wide tires. – In the winter, narrow tires are better under extreme conditions as they provide higher surface pressure against the road.

You might be interested:  How Much For New Tires?

Can I put 2 different size tires on my car?

Long story short: Yes, it is a problem to have two tires of different sizes on the front (or back) of your car. Having two differentsized tires on the same axle is generally not a good thing. Sometimes, people choose to put larger tires on the rear axle of their vehicle for handling reasons, cosmetic reasons, etc.

Can you put different width tires on same rim?

To keep the suspension and speedometer functioning correctly, both the stock diameter and width of the wheels and tires needs to be maintained. As a general rule of thumb, it’s safe to fit a tire up to 20 millimeters wider than stock on the original rim.

Can I use 215 tires instead of 205?

Nope. The nominal diameter of the 215’s is 1.7% greater than that of the 205’s. The sidewall height is a percentage of the width of the tire, so a 55 series is taller with a wider tire.

How tall is a 17 inch tire?

17 INCH TIRES TIRE HEIGHT
225 35 17 23.20
245 35 17 23.75
315 35 17 25.68
335 35 17 26.23

What does the Z mean on tires?

A “Z” rating can mean different things. While it nearly always means a high performance tire for high-performing sports cars, “Z” may actually appear in the middle of a tire’s size information. When it does, it represents either a maximum speed of more than 149 mph (240 kph) or 186 mph (300 kph).

What does R stand for in tire size?

For example, this aspect ratio of 50 means that the tire’s section height is 50% of the tire’s section width. R indicates the construction used within the tires casing. R stands for radial construction.

Leave a Reply

Your email address will not be published. Required fields are marked *